automatic barriers and bollards also semi automatic

vehicle induction loops for security barriers and electric gates vehicle induction loop and auto barriers
Please feel free to call
us with any queries or
orders 9.00am-9.00pm

width="823"9">

Vehicle induction loop installation is simple if you follow our instructions but we are only to pleased to help you if you are in doubt installing . We will give you free advice and technical know how on all aspects of perimeter protection. if you do not see your exact requirements below please contact us
security barrier credit cards accepted

 

Vehicle Induction loops for security barriers or electric gates are designed to detect the change of metal content above the loop by way of
electromagnetism in short a metal object above the loop. The loop is a single core cable going round a slot at least three times and embedded
in the road .
The groove in the road can be cut by a large angle grinder or better still a Sthil type saw or a floor saw. The appx depth of the slot is 100mm.

Our induction loops are digital types with a large margin for movement in the roadway and an adjustable sensitivity so that they can be set to
detect a wide range of vehicles.The loops can be set so they send a pulse n/o or n/c or will stay n/o n/c as long as a metal object is above the
loop.

Induction loops can be used as safety or for automatically opening a gate or barrier

For pedestrian safety you should use safety beam

Please contact us if you require installation

A TYPICAL INDUCTION LOOP
induction loop slot
Installation For a security barrier or electric gate

1/Cut slot appx 100mm deep from the control equipment around the shape you want (a box is usual)

2/ Starting from your control box insert a single core cable go round the box at least three times, twist the two ends
and bring back to your control equipment and wire to the loop detector

3/ Cover the slots with bitumin or sealant

HOW TO INSTALL AN INDUCTION LOOP

how to install an induction loop

induction loop sensor

Cost Of Loop Detector 12- 24vac/ dc £45.00+vat
Cable £0.50 per meter appx 30m needed

 

CLICK HERE FOR OTHER BARRIERS, ACCESS AND PARKING CONTROL EQUIPMENT

Alternatively click here for our bollards website

For more information contact us.

Hi-Tech Security Systems
Unit 4F Moor park Industrial estate
Bispham
Blackpool
FY2 0JY
England

Telephone +44 (0) 1253 781827 or Fax +44 (0) 5600437480
or alternatively email us on sales@barriers-uk.com

Counter